RAGE (Bethesda Softworks) (RUS/ENG) [L]

Fix for the texture problems.

1.Create a Rage shortcut with the following launch parameters: +cvaradd g_fov 12 +com_allowconsole 1 +com_skipIntroVideo 1 +image_anisotropy 16 +image_usecompression 0 +g_showplayershadow 1 +m_smooth 0

2.Create a file called rageconfig.cfg in Rage/base/ and put the following commands in there: vt_pageimagesizeuniquediffuseonly2 8192 vt_pageimagesizeuniquediffuseonly 8192 vt_pageimagesizeunique 8192 vt_pageimagesizevmtr 8192

3. Go to C:\Users\UserName\AppData\Local\ and create a folder called "id software" (without "). Then create a folder called "rage" (without ") inside that folder.

4. Run game and play.

[Major Performance Fix]Custom Config Files With V-SYNC!!! Here's a config file I made for performance fixes To use the file copy the code below and put it into a new text file named "rageConfig.cfg" in this Location "Steam\steamapps\common\rage\base" This Fix may also reduce the texture streaming issue by using Cache options! Note: you will not get vac banned for making a config file.

WARNING: With the use of this config file, Make sure you set your video card settings back to "let the application decide" or your game may not run properly, This also includes Tessellation. Also Disable Crossfire(AMD/ATI) And or SLI(Nvidia) as this game doesn't use those, thus resulting in lower performance if used.

And Remember to keep this thread Polite!

Video of the config file in action: http://www.youtube.com/watch?v=Wa3iYEtzbFE&hd=1 NOTE: FRAPS CAUSES THE GAME TO RUN SLOWER WHILE RECORDING!... While not recording I get a solid 60fps.

I'm running a Sapphire Radeon HD 6870(Black Edition) with the 11.9 drivers and the proper Hot-fix drivers, using the High-end config and AA at 8x in the game.

Config Settings for High-end systems: Code:

seta com_videoRam "1024" //sets the Video Card memory Set this to the amount you have in MB seta com_maxfps "60" //limits the frames to 60 can be changed to what you desire seta image_anisotropy "16" //Using the highest setting here but you can set as 2, 4 or 8 seta image_usecompression 0 seta image_filter "GL_LINEAR_MIPMAP_LINEAR" //filtering for light maps seta image_preload "1" //Use preload images when ever possible seta image_lodbias "-1" //LoD settings seta image_ignoreHighQuality "0" //Sets up for using HQ gfx seta image_ignoreLowQuality "1" //ignores the low textures seta image_useCache "1" //Enabled Cache to allow the textures to load properly without popping seta image_cacheMegs "125" //Cache size in Megabytes seta image_cacheMinK "50" //Cache minimum size in kilobytes seta r_swapInterval 1 //VSYNC 1 enabled, 0 diabled seta r_useHighQualityPostProcess "1" //Fore High Quality post proccessing seta r_shadowsHighQuality "1" //Fore High Quality shadows seta r_displayRefresh "0" //keep it so the engine doesn't double render a frame seta r_renderer "best" //highest rendering options seta r_multiSamples "32" //Set this to 16 or 8 if you're having low-fps as 32 is the Max Multi-sampling seta r_useHBAO "1" //Ambient occlusion seta r_useRenderThread "0" // 0 Disable or 1 Enable threaded rendering useful for newer cards to increase performance. seta r_visDistMult "1" seta r_useMotionBlur "1" //use blur seta r_skipBump "0" seta r_skipSpecular "0" seta r_skipNewAmbient "0" seta r_shadows "1" seta r_cgFragmentProfile "best" seta r_cgVertexProfile "best" seta vt_lodBias "-1" //LoD settings //below is cache settings seta vt_pageimagesizeuniquediffuseonly2 "8192" seta vt_pageimagesizeuniquediffuseonly "8192" seta vt_pageimagesizeunique "8192" seta vt_pageimagesizevmtr "8192"

Config Settings for Mid-end systems: Code:

seta com_videoRam "1024" //sets the Video Card memory Set this to the amount you have in MB seta com_maxfps "60" //limits the frames to 60 can be changed to what you desire seta image_anisotropy "8" //Using the highest setting here but you can set as 2, 4 or 8 seta image_usecompression 0 seta image_filter "GL_LINEAR_MIPMAP_LINEAR" //filtering for light maps seta image_preload "1" //Use preload images when ever possible seta image_lodbias "-1" //LoD settings seta image_ignoreHighQuality "0" //Sets up for using HQ gfx seta image_ignoreLowQuality "1" //ignores the low textures seta image_useCache "1" //Enabled Cache to allow the textures to load properly without popping seta image_cacheMegs "125" //Cache size in Megabytes seta image_cacheMinK "50" //Cache minimum size in kilobytes seta r_swapInterval 1 //VSYNC 1 enabled, 0 diabled seta r_useHighQualityPostProcess "1" //Fore High Quality post proccessing seta r_shadowsHighQuality "1" //Fore High Quality shadows seta r_displayRefresh "0" //keep it so the engine doesn't double render a frame seta r_renderer "best" //highest rendering options seta r_multiSamples "16" //Set this to 16 or 8 if you're having low-fps as 32 is the Max Multi-sampling seta r_useHBAO "1" //Ambient occlusion seta r_useRenderThread "0" // 0 Disable or 1 Enable threaded rendering useful for newer cards to increase performance. seta r_visDistMult "1" seta r_useMotionBlur "1" //use blur seta r_skipBump "0" seta r_skipSpecular "0" seta r_skipNewAmbient "0" seta r_shadows "1" seta r_cgFragmentProfile "best" seta r_cgVertexProfile "best" seta vt_lodBias "-1" //LoD settings //below is cache settings seta vt_pageimagesizeuniquediffuseonly2 "8192" seta vt_pageimagesizeuniquediffuseonly "8192" seta vt_pageimagesizeunique "8192" seta vt_pageimagesizevmtr "8192"

Config Settings for Low-end systems: Code:

seta com_videoRam "1024" //sets the Video Card memory Set this to the amount you have in MB seta com_maxfps "60" //limits the frames to 60 can be changed to what you desire seta image_anisotropy "2" //Using the highest setting here but you can set as 2, 4 or 8 seta image_usecompression 0 seta image_filter "GL_LINEAR_MIPMAP_LINEAR" //filtering for light maps seta image_preload "1" //Use preload images when ever possible seta image_lodbias "-1" //LoD settings seta image_ignoreHighQuality "1" //Sets up for using HQ gfx seta image_ignoreLowQuality "0" //ignores the low textures seta image_useCache "1" //Enabled Cache to allow the textures to load properly without popping seta image_cacheMegs "125" //Cache size in Megabytes seta image_cacheMinK "50" //Cache minimum size in kilobytes seta r_swapInterval 1 //VSYNC 1 enabled, 0 diabled seta r_useHighQualityPostProcess "1" //Fore High Quality post proccessing seta r_shadowsHighQuality "0" //Fore High Quality shadows seta r_displayRefresh "0" //keep it so the engine doesn't double render a frame seta r_renderer "best" //highest rendering options seta r_multiSamples "8" //Set this to 16 or 8 if you're having low-fps as 32 is the Max Multi-sampling seta r_useHBAO "0" //Ambient occlusion seta r_useRenderThread "0" // 0 Disable or 1 Enable threaded rendering useful for newer cards to increase performance. seta r_visDistMult "1" seta r_useMotionBlur "0" //use blur seta r_skipBump "0" seta r_skipSpecular "0" seta r_skipNewAmbient "0" seta r_shadows "0" seta r_cgFragmentProfile "best" seta r_cgVertexProfile "best" seta vt_lodBias "-1" //LoD settings //below is cache settings seta vt_pageimagesizeuniquediffuseonly2 "8192" seta vt_pageimagesizeuniquediffuseonly "8192" seta vt_pageimagesizeunique "8192" seta vt_pageimagesizevmtr "8192"