Call of Duty: Black Ops III (Activision) (ENG) [L]

          

// //Gameplay //

//Frame rate cap (0 for none) MaxFPS = "120" // 0 to 1000

//Show current framerate on screen DrawFPS = "1" // 0 or 1

//Toggle framerate smoothing SmoothFramerate = "0" // 0 or 1

//Horizontal field of view in degrees assuming 16:9 aspect ratio FOV = "80" // 65 to 120

SplitscreenOrientation = "0" // 0 or 1

//Enable network voice chat VoiceChat = "0" // 0 or 1

//Enable occlusion of sound behind solid surfaces SoundOcclusion = "1" // 0 or 1

//Mouse smoothing amount MouseFilter = "0" // 0 to 10

MouseAcceleration = "0" // 0 to 1

MouseSensitivity = "4" // 0.1 to 30

//Mouse vertical sensitivity MouseVerticalSensitivity = "0.022" // -1 to 1

//Enable vertical look with the mouse MouseVerticalLook = "1" // 0 or 1

//Maximum number of simultaneous human corpses CorpseCount = "32" // 1 to 32

//Number of frames the driver is allowed to enqueue, a lower value improves input latency but may decrease performance. Set it to 0 to use the system default, usually 3. MaxFrameLatency = "1" // 0 to 4

// //Setup //

//Set to zero to force auto-detect to run at startup AutoDetectHasRun = "1" // 0 or 1

//Thread count for handling the job queue WorkerThreads = "2" // 2 to 4

//Clear to check driver against recommended LastDriverNvidia = "0" // 0 or bigger

//Clear to check driver against recommended LastDriverAMD = "150201" // 0 or bigger

//Fraction of video memory usage to target VideoMemory = "0.9" // 0.75 to 1

// //Display //

// 0 - Windowed, 1 - Fullscreen, 2 - Fullscreen Window FullScreenMode = "2" // 0 to 2

//Window X position WindowX = "0" // -8192 to 8192

//Window Y position WindowY = "0" // -8192 to 8192

WindowSize = "1920x1080" // any text

RefreshRate = "120" // 1 to 240

//Monitor index to use for fullscreen Monitor = "1" // 0 to 8

//Vsync only applies in fullscreen Vsync = "0" // 0 or 1

//Percentage of window resolution that the 3D scene renders at ResolutionPercent = "100" // 50 to 200

//Color spaces for monitor output DisplayGamma = "sRGB" // sRGB, rec.709, or rec.709 - Limited

//Set to 3 to enable triple buffering, useful to prevent large framerate drops when vsync is enabled BackbufferCount = "2" // 2 to 3

// //Graphics //

//LOD's to drop on models, lower numbers are higher quality MeshQuality = "0" // 0 to 8

//0 - Force 2x anisotropic filtering, 1 - Per material, 2 - Force 16x anisotropic filtering TextureFilter = "2" // 0 to 2

//Number of mips to drop on streamed textures, lower numbers are higher quality TextureQuality = "1" // 0 to 3

//Number of mips to drop on effects and dynamic decals, lower numbers are higher quality TextureQualityFX = "1" // 0 to 15

//Number of mips to drop on reflections, lower numbers are higher quality TextureQualityProbes = "0" // 0 to 16

//Number of mips to drop on sun shadows, lower numbers are higher quality TextureQualityBakedSunShadows = "0" // 0 to 2

//Force lowest mips to stay loaded instead of streaming TextureLowDetailResident = "0" // 0 or 1

DisableDynamicLightShadows = "0" // 0 or 1

DisableDynamicSunShadows = "0" // 0 or 1

//Resolution of spot light shadows SpotShadowTextureSize = "2048" // 128 to 8192

//Resolution of omni (point) light shadows OmniShadowTextureSize = "256" // 128 to 2048

//Enable multi-sampled soft shadows ShadowFiltering = "1" // 0 or 1

//Number of lights with otherwise static shadows to force characters shadows on ActorShadows = "4" // 0 to 16

//Enable volumetric sun and light shafts VolumetricLightingEnabled = "0" // 0 or 1

//Number of raymarch samples for sunlight VolumetricLightingMaxSunSamples = "8" // 1 to 256

//Number of raymarch samples for local lights VolumetricLightingMaxLightSamples = "40" // 1 to 256

//Skip every other sample if color is constant VolumetricLightingSkipSunSamples = "1" // 0 or 1

//Skip every other sample if color is constant VolumetricLightingSkipLightSamples = "1" // 0 or 1

//Enabled order-independent transparency OIT = "1" // 0 or 1

//Maximum number of overlapping transparency layers OITLayers = "16" // 8, 9, 12, or 16

//Screen-space ambient occlusion method SSAOTechnique = "GTAO High Quality" // Disabled, HEMIAO, GTAO Low Quality, GTAO Medium Quality, GTAO High Quality, or GTAO Ultra Quality

//Anti-aliasing technique AATechnique = "None" // None, FXAA, SMAA 1x, Filmic SMAA 1x, SMAA T2x, or Filmic SMAA T2x

//Per-object motion blur MotionBlur = "Off" // Off, Auto, or On

MotionBlurQuality = "Medium" // Low, Medium, or High

//Better lighting for skin SubsurfaceScattering = "1" // 0 or 1